Browse
Shopping Cart

Material Starter Kit

$168.00 USD
  • $168.00 USD|
  • $324.00 USD|
  • Laser Jump Start's New Wood Collection, LJSM20 Hickory / Rochester Maple and LJSM50 Chalboard Black / Melrose
  •  Laser Jump Start's LJSM20 Hickory / Rochester Maple
  • Laser Jump Start's LJSM50 Chalboard Black / Melrose
  • Laser Jump Start's LJSM20 Hickory / Rochester Maple Engraved Sample
  • Laser Jump Start's LJSM50 Chalboard Black / Melrose Engraved Sample
  • Laser Jump Start's New Wood Collection, LJSM20 Hickory / Rochester Maple and LJSM50 Chalboard Black / Melrose
  •  Laser Jump Start's LJSM20 Hickory / Rochester Maple
  • Laser Jump Start's LJSM50 Chalboard Black / Melrose
  • Laser Jump Start's LJSM20 Hickory / Rochester Maple Engraved Sample
  • Laser Jump Start's LJSM50 Chalboard Black / Melrose Engraved Sample

New Wood Collection

LJSM20 and LJSM50

Materials Suited for BoxIt Suite, FlexIt Suite, FrameIt Suite, & ARTWelder Products in Addition to a Cost-Effective Alternative for Engraving!

  • 12 Sheets per color-set for a total of 24 Sheets
  • Two Colors/Patterns per Sheet
  • Starter Kits Available in 24”x 12” & 24”x 24” Sheets
  • 2 Color-Sets Available; 4 Total Colors
  • Material is Finished on Both Sides
  • Cost-Effective Alternative Material for Engraving
  • Custom Sizes Available Too!

What are the Materials Made from?

Our materials are a proprietary blend of medium density fiber and finished with a paper blend on both sides.  

What is the Benefit of Using the Materials for Laser Users?

  • The Select 1/8” Double-Sided, Color-Set Laser Materials have some flexibility making it easier to work with when assembling your BoxIt and other Projects.
  • Many similar materials are only finished on one side, leaving an unfinished side to try and disguise when making laser products. When you are working with material that is finished on both sides, you can easily create your one-dimensional ARTWelder products, three-dimensional BoxIt Suite products, and more with far less effort!
  • Easy to clean! When the material is cut from the laser, the smoky residue left behind is easily removed by using a cloth with a small amount of soapy water while rubbing over the material after cutting/engraving. The surface residue comes right off! You can also use transfer tape for more intricate and delicate items if desired.

FedEx Ground Transit Times from Laser Jump Start to U.S. Business Destinations

FedEx Ground Transit Times from Laser Jump Start to U.S. Business Destinations

Note: Home Delivery shipping is slightly higher and may take an extra day for delivery for reference. 

 

Would you like a Material Sample Kit of our materials? Our Material Sample Kits are FREE!

Just Cover the Cost of shipping! 

Available for US shipping addresses only.

Laser Jump Start Material Sample Kit Request

 

Material Starter Kit

$168.00 USD

Material Starter Kit

$168.00 USD

Best quality

Safe checkout

Description

New Wood Collection

LJSM20 and LJSM50

Materials Suited for BoxIt Suite, FlexIt Suite, FrameIt Suite, & ARTWelder Products in Addition to a Cost-Effective Alternative for Engraving!

  • 12 Sheets per color-set for a total of 24 Sheets
  • Two Colors/Patterns per Sheet
  • Starter Kits Available in 24”x 12” & 24”x 24” Sheets
  • 2 Color-Sets Available; 4 Total Colors
  • Material is Finished on Both Sides
  • Cost-Effective Alternative Material for Engraving
  • Custom Sizes Available Too!

What are the Materials Made from?

Our materials are a proprietary blend of medium density fiber and finished with a paper blend on both sides.  

What is the Benefit of Using the Materials for Laser Users?

  • The Select 1/8” Double-Sided, Color-Set Laser Materials have some flexibility making it easier to work with when assembling your BoxIt and other Projects.
  • Many similar materials are only finished on one side, leaving an unfinished side to try and disguise when making laser products. When you are working with material that is finished on both sides, you can easily create your one-dimensional ARTWelder products, three-dimensional BoxIt Suite products, and more with far less effort!
  • Easy to clean! When the material is cut from the laser, the smoky residue left behind is easily removed by using a cloth with a small amount of soapy water while rubbing over the material after cutting/engraving. The surface residue comes right off! You can also use transfer tape for more intricate and delicate items if desired.

FedEx Ground Transit Times from Laser Jump Start to U.S. Business Destinations

FedEx Ground Transit Times from Laser Jump Start to U.S. Business Destinations

Note: Home Delivery shipping is slightly higher and may take an extra day for delivery for reference. 

 

Would you like a Material Sample Kit of our materials? Our Material Sample Kits are FREE!

Just Cover the Cost of shipping! 

Available for US shipping addresses only.

Laser Jump Start Material Sample Kit Request

Materials Chart

 

Reviews