Our normal LJSM002 and LJSM005 materials are temporarily out-of-stock while waiting on our resupply! The mill had some manufacturing issues in February, so our resupply has been delayed. You are welcome to place your order now so we can include in our first batch once stock arrives. Resupply estimated in Mid-March 2020!

In the meantime, You can now order our discounted Scratch & Dent 24"x12" sheets!

The scratches may be near the edges and some run the full length of the material; however, most scratches are on the Black side of the material leaving the Cinnamon side perfectly usable.

The Scratch & Dent sheets are a bit thicker as well, 0.140" versus our typical 0.122"-0.125" thickness range. As these sheets are thicker, you need to use Air Assist on your laser for cutting. Though you can use this thickness for flexing with living hinges and flexible design pieces with the FlexIt Suite program, this thickness works best for BoxIt Suite, ARTWelder, FrameIt Suite, and non-flexing laser applications.

Scratch & Dent sheets are perfect for one-sided project, part fixtures, and more!

For Custom Sizes. Please call us at (208)697-5587.

Custom sizes include:

• 16x12 Sheet Size, $5/sheet + $20 Cut Charge per order
• 18x12 Sheet Size, $5.50/sheet + $20 Cut Charge per order
• 24x12 Sheet Size, $6.50/sheet
• 24x16 Sheet Size, $9/sheet + $20 Cut Charge per order
• 24x18 Sheet Size, $10/sheet + $20 Cut Charge per order
• 24x24 Sheet Size, $13/sheet
• 48x24 Sheet Size, $26/sheet + $20 Cut Charge per order, Special Shipping Arrangements Required

To fulfill the $100 minimum order for LJS Materials. Include 16 24x12 sheets, 8 24x24 sheets or a combination of the 2.

For Bulk Orders of more than 150 lbs, 85 sheets of 24x12, 40 sheets of 24x24 or a combination summing up to 150 lbs, Please contact us at (208) 697-5587.

LJS M005 Colors Include Light Cinnamon and Solid Black

What are the Materials Made from?

Our materials are a proprietary blend of medium density fiber and finished with a paper blend on both sides.  

What is the Benefit of Using the Materials for Laser Users?

• The Select 1/8” Double-Sided, Color-Set Laser Materials have some flexibility making it easier to work with when assembling your BoxIt and other Projects.

• Many similar materials are only finished on one side, leaving an unfinished side to try and disguise when making laser products. When you are working with material that is finished on both sides, you can easily create your one-dimensional ARTWelder products, three-dimensional BoxIt Suite products, and more with far less effort!

• Easy to clean! When the material is cut from the laser, the smoky residue left behind is easily removed by using a cloth with a small amount of soapy water while rubbing over the material after cutting/engraving. The surface residue comes right off! You can also use transfer tape for more intricate and delicate items if desired.

FedEx Ground Transit Times from Laser Jump Start to U.S. Business Destinations

Note: Home Delivery shipping is slightly higher and may take an extra day for delivery for reference. 

Would you like a sample kit of our materials? Please complete the request form below.

Available for US shipping addresses only.